General Instructions Regarding Working with Application Materials
C-1
P/N 7105144G
2008 Nordson Corporation
VersaBlue_NW
Appendix C
General Instructions Regarding Working with
Application Materials
Definition of Terms
Application materials can be e.g. thermoplastic hot melt materials, adhe-
sives, sealants, liquid adhesives and similar application materials. They are
referred to as materials.
NOTE: The materials that may be processed with your Nordson product
are described in the manual under Intended Use and Unintended Use.
When in doubt, please contact your Nordson representative.
Manufacturer Information
Materials may be processed only when the manufacturer’s product descrip-
tions and Safety Data Sheets (MSDS) are observed.
They provide information, amongst other things, on correct processing of
the product, transport, storage and disposal. Information regarding reactivity
and potentially hazardous decomposition products, toxic properties, flash
points, etc. can also be found there.
Liability
Nordson is not be liable for danger or damage resulting from the materials.
Risk of Burns
There is a risk of burns when handling heated materials. Work carefully and
wear appropriate protective clothing/equipment.
To Next Page
Loading...
Need help?
General
