Qlogic 5800V Series User Manual

5–Managing Switches
Managing User Accounts
59266-01 B 5-3
6. If the account is to have the ability to modify switch configurations, select the
Admin Authority Enabled option.
7. Enter a password in the New Password box and enter it again in the Verify
Password box. A password must have a minimum of 8 characters and no
more than 20.
8. If this account is to be permanent with no expiration date, select the
Permanent Account option. Otherwise, click Account Will Expire and
enter the number days in which the account will expire.
9. Click Add Account to add the newly defined account.
10. Click Close to close the User Account Administration dialog box.
Removing a User Account
To remove a user account on a switch:
1. Select a switch or stack in the fabric tree.
2. On the Switch menu, click User Accounts to view the User Account
Administration dialog box. For a stack, select Stack > User Accounts.
3. Click the Remove Account tab to view the Remove Account tab page
(Figure 5-2).
4. If you selected a stack, choose a switch from the Initial Configuration
drop-down list. Changes that you make to this switch are distributed to the
other switches in the stack.
5. Select the account (Login) name from the list of accounts at the top of the
dialog box.
6. Click Remove Account.
7. Click Close to close the User Account Administration dialog box.

Qlogic 5800V Series Specifications

General

Brand	Qlogic
Model	5800V Series
Category	Switch
Language	English