Qlogic 5800V Series User Manual

5–Managing Switches
Configuring the Network
5-44 59266-01 B
Figure 5-21. Edit Peer Dialog Box
Copying a Peer Configuration
To copy a peer configuration to the workstation clipboard:
1. On the Switch menu, click Network, and then click IPsecIKE Properties to
view the IKE Configuration dialog box (Figure 5-19).
2. On the IKE Peer Database side, click the peer in the list to be copied.
3. Click Copy.
4. Click OK to save the changes and exit the IKE Configuration dialog box, or
click Cancel to exit without saving any changes.
Pasting a Peer Configuration
To paste a copied peer configuration from the workstation clipboard:
1. On the Switch menu, click Network, and then click IPsecIKE Properties to
view the IKE Configuration dialog box (Figure 5-19).
2. On the IKE Peer Database side, click Paste.
NOTE: Copy/pasting a current peer configuration is a convenient way to
add/configure a new peer.

Qlogic 5800V Series Specifications

General

Brand	Qlogic
Model	5800V Series
Category	Switch
Language	English