Qlogic 5800V Series User Manual

5–Managing Switches
Configuring the Network
59266-01 B 5-53
Importing a Certificate
To import a certificate:
1. On the Switch menu, click Network, and then click IPsec Certs to view the
IKE Certs dialog box (Figure 5-24).
2. Below the Certificates window, click Import Cert to view the Local
Certificate dialog box.
3. Enter the certificate name in the Certificate Name text box
4. Click OK to close the Local Certificate dialog box, and then view the
imported certificate name in the Certificates window.
5. Click Close to close the IKE Certs dialog box.
Deleting a Certificate
To delete a certificate:
1. On the Switch menu, click Network, and then click IPsec Certs to view the
IKE Certs dialog box (Figure 5-24).
2. In the Certificates window, click the certificate to delete.
3. Below the Certificates window, click Delete Cert, and then verify that
certificate is no longer listed in the Certificates window.
4. Click Close to close the IKE Certs dialog box.

Qlogic 5800V Series Specifications

General

Brand	Qlogic
Model	5800V Series
Category	Switch
Language	English