Qlogic 5800V Series User Manual

5–Managing Switches
Restoring a Switch
5-76 59266-01 B
1. Select a switch in the fabric tree.
2. On the Switch menu, click Archive.
3. In the Save dialog box, enter a file name.
4. Click Save.
Restoring a Switch
Restoring a switch loads the archived switch configuration parameters to the
switch. The administrative state of the switch must be set to Offline using the
Switch Properties dialog box before an archive can be used in the restore
process. The switch type archive must be compatible with the switch to be
restored. For more information, see “Archiving a Switch” on page 5-75.
Figure 5-38. Restore Dialog Boxes—Full and Selective
To restore a switch:
CAUTION!
The switch being restored should be physically disconnected from the fabric.
Restoring a switch in a fabric can severely disrupt the fabric. After the
restore process is complete, the switch can be reconnected to the fabric.

Qlogic 5800V Series Specifications

General

Brand	Qlogic
Model	5800V Series
Category	Switch
Language	English