Qlogic 5800V Series User Manual

5–Managing Switches
Configuring the Network
59266-01 B 5-29
Configuring the Network
Network configuration includes:
 Network IP configuration
 Network Domain Name Service (DNS) configuration
 Network IP security
To configure IP and DNS parameters:
1. Select a switch in the fabric tree.
2. On the Switch menu, click Network and click Network Properties to view
the Network Properties dialog box. Or, right-click a switch graphic in the
topology or faceplate display, and click Network Properties on the shortcut
menu.
3. Click the IP tab to view the Network Properties IP dialog box or the DNS tab
to view the Network Properties DNS dialog box, as appropriate for your
network setup (Figure 5-15).
4. Make the changes to the network properties. For information about the IP
network properties, see “Network IP Configuration” on page 5-30. For
information about DNS network properties, see “Network DNS
Configuration” on page 5-32.
5. After making changes, click OK to put the new values into effect.

Qlogic 5800V Series Specifications

General

Brand	Qlogic
Model	5800V Series
Category	Switch
Language	English