Qlogic 5800V Series User Manual

1–Using Enterprise Fabric Suite
Enterprise Fabric Suite User Interface
1-16 59266-01 B
 Switch—displays current network and switch configuration data for the
selected switch. For more information, see “Switch data window” on
page 5-7.
 Link—displays a list of the inter-switch links in the fabric. For information on
switch links, see “Link Data Window” on page 2-7.
 Stack Links—displays a list of the inter-switch links in the stack. For
information on switch links, see “Stack Links data window” on page 5-13.
 Port Statistics—displays performance data for the selected ports. For more
information, see “Port Statistics Data Window” on page 6-8.
 Port Information—displays information for the selected ports. For more
information, see “Port Information Data Window” on page 6-1.
 Configured Zonesets—displays all zone sets, zones, and zone membership
in the zoning database. A zone is a named group of ports or devices. For
more information, see “Viewing Active and Configured Zone Set Information”
on page 4-4.
Use the scroll bar to browse through the data. To adjust the length of the window,
click and drag the border that it shares with the graphic window. To adjust the
column width, move the pointer over the column heading border shared by two
columns until a right/left arrow graphic appears. Click and drag the arrow to the
preferred width.
Alerts Panel
The Alerts panel shows all reasons for status, including faults. The Alerts panel
entries are the highlighted rows between the faceplate image and the data
window entries.
The up/down arrows on the divider bar between the Alerts panel entries and data
windows enable you to move the divider bar up or down incrementally. With the
faceplate image on the graphic window and the data window displayed, you can
do the following:
 Click the up arrow (on the left) to move the divider up to the top of the
window, completely hiding the faceplate image.
 Click the down arrow (on the right) to move the divider back to the middle.
Click the down arrow again to completely hide the data window.
 Click and drag the divider bar to manually move it up or down.

Qlogic 5800V Series Specifications

General

Brand	Qlogic
Model	5800V Series
Category	Switch
Language	English