Qlogic 5800V Series User Manual

59266-01 B xv
Preface
This manual describes the Enterprise Fabric Suite™ application (version 8.00.13)
for the QLogic 5800V Series Stackable Fibre Channel Switch (firmware version
8.0).
The Enterprise Fabric Suite switch management application is the primary focus
of this manual which is organized as follows:
 Section 1 describes how to use Enterprise Fabric Suite, its menus, and its
displays.
 Section 2 describes fabric management tasks.
 Section 4describes fabric zoning management tasks.
 Section 3 describes fabric security management tasks.
 Section 5 describes switch management tasks.
 Section 6 describes port and device management tasks.
A glossary of terms and an index are also provided.
NOTE:
If you haven't purchased QLogic Enterprise Fabric Suite, try it for 30 days
free of charge. Enterprise Fabric Suite is a suite of tools for fabric
management, performance monitoring, fabric monitoring, distance
configuration, switch configuration with configuration and zoning wizards,
and much more. A full featured 30-day trial is included with the purchase of
each QLogic 5800V Series Stackable Fibre Channel switch. Enterprise
Fabric Suite can be installed from the CD-ROM found in the accessories box
of QLogic 5800V Series Stackable Fibre Channel switches. Insert the
CD-ROM into the workstation of your choice and follow the prompts. Take
advantage of QLogic's powerful suite of fabric management tools for 30
days, then contact your switch distributor or authorized re-seller to purchase
Enterprise Fabric Suite.

Qlogic 5800V Series Specifications

General

Brand	Qlogic
Model	5800V Series
Category	Switch
Language	English