EasyManuals Logo
Home>Qlogic>Switch>5800V Series

Qlogic 5800V Series User Manual

Qlogic 5800V Series
256 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #245 background imageLoading...
Page #245 background image
59266-01 B Glossary-3
User’s Guide Enterprise Fabric Suite
5800V Series Fibre Channel Switches
hard zone
A hard zone is a division of the fabric for
the purposes of controlling discovery and
inbound traffic.
HBA
Host Bus Adapter
Heartbeat LED
A switch LED that indicates the status of
the internal switch processor and the
results of the Power On Self Test.
IFZ
An IFZ (inter-fabric zone) enables
controlled and limited access between
devices on a local fabric and devices on a
remote fabric of other vendor switches. An
IFZ contains three WWN members: the
local device, the remote device, and the
TR_Port attached to the remote fabric.
IKE (Internet Key Exchange)
A means to automatically create an IPsec
SA on both SA endpoints.
IKE Peer
An external device accessible through the
management Ethernet interface on the
switch.
IKE Policy
An object used to describe the type (e.g.,
Telnet, FTP) of user data traffic that you
want to secure for a given IKE peer.
inactive firmware
The firmware image on the switch that is
not in use.
in-band management
The ability to manage a switch through
another switch over an inter-switch link.
initiator
The device that initiates a data exchange
with a target device.
Input Power LED
A switch LED that indicates that the switch
logic circuitry is receiving proper DC
voltages.
Inter-Switch Link (ISL)
The connection between two switches
using E_Ports.
Internet Key Exchange (IKE)
A means to automatically create an IPsec
SA on both SA endpoints.
LIP
Loop Initialization Primitive sequence
JDOM
An open source Java-based document
object model for XML that was designed
specifically for the Java platform to take
advantage of its language features.
Logged-in LED
A port LED that indicates device login or
loop initialization status.
LUN
Logical Unit Numbers
Maintenance button
A momentary button on the switch used to
reset the switch or place the switch in
maintenance mode.
maintenance mode
Sets the IP address to 10.0.0.1 and
provides access to the switch for mainte-
nance purposes.

Table of Contents

Other manuals for Qlogic 5800V Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Qlogic 5800V Series and is the answer not in the manual?

Qlogic 5800V Series Specifications

General IconGeneral
BrandQlogic
Model5800V Series
CategorySwitch
LanguageEnglish

Related product manuals