Qlogic 5800V Series User Manual

2–Managing Fabrics
Transparent Router
59266-01 B 2-15
6. After selecting an option from the 3 Select a TR Port column, the OK button
becomes active.
7. Click OK to save the changes and close the Add TR Mapping dialog box.
8. Verify that the new TR mapping members appear in the TR Mapping list of
the TR Mapping Manager dialog box, and then click OK.
NOTE:
After you click OK in the TR Mapping Manager dialog box, the IFZs are
created and saved to the switch. If there is an active zone set with TR
mappings, the old IFZs are deleted and replaced with the new IFZs, and
then the active zone set is re-activated. If there is no active zone set, a zone
set named TR_MAPPING_SET” (default name) is created, the new IFZs are
added to the zone set, and then the zone set is activated. If there are no TR
mappings, the old IFZs are deleted from the active zone set, and then the
active zone set is re-activated. If there are no zones and no IFZs in the
active set, the active zone set is deactivated.

Qlogic 5800V Series Specifications

General

Brand	Qlogic
Model	5800V Series
Category	Switch
Language	English