The [Menu] screen appears.
10. Press the [ ] or [ ] key to display [Paper Input], and then press the [ Enter] key.
11. Press the [ ] or [ ] key to display [Tray Paper Size], and then press the [ Enter] key.
12. Press the [ ] or [ ] key to select [Tray 2], and then press the [ Enter] key.
13. Press the [ ] or [ ] key to select the envelope type, and then press the [ Enter] key.
14. Press the [Menu] key.
The initial screen appears.
• Confirm that the top of the stack is not higher than the limit mark on the side guides.
• Confirm that the envelopes fit under the side guides.
• Do not push the stack of envelopes with too much force.
• Keep the removed paper tray with paper in a cool and dry place.
• p.88 "Types of Paper and Other Media"
Switching Between Paper Trays
When paper of the same size is loaded in both the Tray1 and the paper feed unit (option), and when [Aut.
Tray Select] is set with the printer driver, paper will be fed from the Tray1 when you start printing. To print
5. Paper and Other Media
116
To Next Page
Loading...
Need help?
General
