8. Adjusting the Printer
This chapter explains how to adjust the color gradations, color alignment, and print position.
Adjusting the Image Density
You can adjust the image density using the control panel if the image density is not appropriate.
• Extreme settings may create printouts that appear dirty.
• Image Density settings should be made from the application or the printer driver whenever possible.
1. Press the [Menu] key.
The [Menu] screen appears.
2. Press the [ ] or [ ] key to display [Maintenance], and then press the [ Enter] key.
3. Press the [ ] or [ ] key to display [Image Density], and then press the [ Enter] key.
4. Press the [ ] or [ ] key to specify the image density, and then press the [ Enter] key.
You can specify the image density in the range of -6 to +3.
155
To Next Page
Loading...
Need help?
General
