If Error Occurs with the Specified Paper Size and
Type
This section gives instructions for operating the printer when there is no tray for the selected paper size or
type, or when paper loaded in the printer has run out.
• The tray cannot be changed if the following functions are set:
• Duplex Print to a tray that does not support duplex printing
• Cover Sheet
• Slip Sheet
• If form feed is selected for a tray with the following settings, you can change the tray by canceling
the settings:
• Duplex Print
• Staple
• If [Auto Continue] is selected, form fed paper is printed after a set interval. For details, see System
Menu.
• p.149 "System Menu"
Printing from a Selected Tray
If the printer does not have a tray for the selected paper size or paper type, or if the selected paper loaded
in the printer has run out, a caution message appears. If this message appears, do the following procedure.
1. Press the [Form Feed] key, and then select the paper tray on the screen.
2. Select the tray for form feed using the [ ] or [ ] key from those that appear on the display
panel, and then press the [ Enter] key.
The printer prints using the selected tray.
2. Printing Documents
94
To Next Page
Loading...
Need help?
General
