Using PostScript 3
Job Type
Use this to select the type of print job.
The following table shows the tabs or menus where you can select this function.
Mac OS X [Job Type:] on [Job Log] in the print dialog box.
You can select the following items:
Normal Print
Select this for normal printing. The print job starts immediately after the print command is given.
Sample Print
Use this function to print only one set of a multiple print jobs.
The other sets are saved in the printer. The saved job can be printed from the printer's control panel.
You can also delete the saved job.
• The "User ID:" can contain up to eight alphanumeric (a- z, A- Z, 0- 9) characters.
• Entering the "User ID:" helps you distinguish your print job from others.
Locked Print
Use this function to save documents in the printer memory with a password, and then edit and print
them as you want.
• The "User ID:" can contain to eight alphanumeric (a-z, A-Z, 0-9) characters. The "Password"
must be 4-8 digits.
• Entering the "User ID:" helps you distinguish your print job from others.
Hold Print
Use this function to temporarily hold a file in the printer, and print it from the computer or the printer's
control panel later.
• The "User ID:" can contain up to eight alphanumeric (a- z, A- Z, 0- 9) characters.
• The "File Name:" can contain to 16 alphanumeric (a-z, A-Z, 0-9) characters.
• Entering the "User ID:" helps you distinguish your print job from others.
Using PostScript 3
303
To Next Page
Loading...
Need help?
General
