The default is 10800 seconds.
Advertise packet TTL settings
msh> ssdp ttl {1-255}
The default is 4.
ssh
Use the "ssh" command to view and configure SSH settings.
View settings
msh> ssh
Data compression communication settings
msh> ssh compression {on|off}
The default is "on".
SSH/SFTP communication port setting
msh> ssh port {22, 1024-65535}
The default is 22.
SSH/SFTP communication timeout setting
msh> ssh timeout {0-65535}
The default is 300.
SSH/SFTP communication login timeout setting
msh> ssh logintimeout {0-65535}
The default is 300.
Setting an open key for SSH/SFTP
msh> ssh genkey {512|768|1024} "character string"
Create an open key for SSH/SFTP communication.
Usable characters are ASCII 0x20-0x7e (32 bytes) other than "0".
The default key length is 1024, and the character string is blank.
If you do not specify this parameter, an open key with the default value will be created.
Deleting open key for ssh/sftp communication
msh> ssh delkey
• If you do not specify a character string, current setting is displayed.
Remote Maintenance by telnet
249
To Next Page
Loading...
Need help?
General
