To Next Page

To Previous Page

DNS server address selection

msh> dhcp dnsaddr {dhcp | static}

• Specify whether to obtain the DNS server address from the DHCP server or use the address set

by a user.

• To obtain the DNS server address from the DHCP server, specify "dhcp". To use the address set

by a user, specify "static".

Domain name selection

msh> dhcp domainname {dhcp | static}

• Specify whether to obtain the domain name from the DNS server or use the domain name set

by a user.

• To obtain the domain name from the DHCP server, specify "dhcp". To use the domain name set

by a user, specify "static".

dhcp6

Use the “dhcp6”command to display or configure DHCPv6 settings.

View settings

The following command displays the current DHCPv6 settings.

msh> dhcp6

DHCPv6-lite configuration and display

msh> dhcp6 “interface_name” lite {on|off}

Viewing and specifying DNS server address selection (obtained from the dhcpv6 server/user

specified value)

msh> dhcp6 dnsaddr {dhcp|static}

DUID(DHCP unique ID) deletion and display

msh> dhcp6 duid clear

Viewing and specifying the time required to re-obtain the parameter obtained from dhcpv6

msh> dhcp6 option lifetime [0-65535]

• It can be entered between 0 and 65535 minutes.

• The default is 60 minutes.

• If you specify "0", you cannot re-obtain the value.

diprint

The direct printing port enables direct printing from a network-connected computer.

5. Monitoring and Configuring the Printer

226

Ricoh CL4000DN Quick Installation Guide

Other manuals for Ricoh CL4000DN