3
1. UNIX Configuration
This section explains how to set up a network printer and check print status us-
ing UNIX.
Before Setup
Important
❒ To print from a UNIX workstation, use a file that the printer supports.
Setting up varies depending on the printing commands. Make sure to make set-
tings accordingly.
Using the lp / lpr commands
A Use the installation shell script to register the device option, as well as the
printer host name and the IP address.
See p.4 “Using the Installation Shell Script”.
B Start printing.
See p.14 “Printing Method”.
Using the rsh / rcp / ftp commands
A Edit the host file to register the printer host name and the IP address.
B Start printing.
See p.14 “Printing Method”.
Reference
See p.9 “After Executing the Installation Shell Script” for host file editing.
Note
❒ If you cannot edit the host file, use the install shell script to register the host
name.
To Next Page
Loading...
Need help?
General
