• Device Settings function
• Lock some of the setting items on the control panel so that they cannot be changed using
the control panel.
• Select type of paper loaded in the paper trays.
• Energy Saver function
• Enable or disable the Energy Saver mode.
• System Status function
• Display the information such as when paper is depleted during printing on a computer.
• Groups function
• Monitor multiple printers at the same time. When there are multiple printers to manage, you
can create groups and classify the printers to facilitate management.
• You can customize printer status according to groups, and send status notification e-mail
to a computer.
Installing SmartDeviceMonitor for Admin
Follow the procedure below to install SmartDeviceMonitor for Admin.
1. Quit all applications currently running.
2. Insert the CD-ROM into the CD-ROM drive.
The installer starts.
3. Select an interface language, and then click [OK].
The default interface language is English.
4. Click [SmartDeviceMonitor for Admin], and then click [Next>].
The software license agreement appears in the [License Agreement] dialog box.
5. After reading through its contents, click [Next>].
6. Follow the instructions on the screen.
A message appears when the installation is completed.
7. Click [OK].
A message about restarting the computer may appear. Restart the computer to complete installation.
• Auto Run may not work under certain operating system settings. In this case, launch “Setup.exe”
located on the CD-ROM root directory.
• If you are required to restart the computer after installing SmartDeviceMonitor for Admin, restart the
computer and continue the configuration.
Using SmartDeviceMonitor for Admin
195
To Next Page
Loading...
Need help?
General
