Advanced Printing
This chapter explains the printer's advanced printing functions.
In addition to the [Edit] tab in the printing preferences dialog box, the [Setup], [Finishing], and [Misc.] tabs
also allow you to change print settings. By clicking on these tabs, you can change the settings listed below.
Settings that can be changed on each Tab
The following is an overview of the settings that are available on the [Setup], [Finishing], and [Misc.] tabs.
[Setup] tab
You can enable/disable the cover and slip sheets function.
• Cover sheets
Using this function, you can insert cover sheet fed from a different tray to that of the main paper,
and print on them. For details, see "Printing on Cover Sheet".
• Slip Sheets
Using this function, you can insert slip sheets fed from a different tray to that of the main paper,
and print on them. For details, see "Inserting Slip Sheets".
[Finishing] tab
You can enable/disable the collate function.
• Collate
When printing multiple sets of documents such as handouts for meetings, you can have prints
delivered in batches of ordered sets. For details about collate function, see "Collate".
[Misc.] tab
You can change various settings for spool printing and other print options.
• Spool Printing
The print job is transmitted to the machine and temporarily stored when printing. For details about
the spool printing, see "Spool Printing".
• p.72 " Printing on Cover Sheet"
• p.73 "Inserting Slip Sheets"
• p.74 " Using Collate Function"
• p.75 "Spool Printing"
Advanced Printing
71
To Next Page
Loading...
Need help?
General
