• If a tray with a smaller paper size is selected, the print job may be cut short, or other problems may
occur.
Canceling a Print Job
Follow this procedure for canceling the print job if the message prompting form feed appears.
1. Press the [Job Reset] key.
The "Job Reset?" screen appears.
2. Select the current job or all jobs (including the current job) using the [
] or [ ] key.
It is also possible to annul the cancellation. Printing resumes if you select [Resume Print], and then
press the [
Enter] key
3. Press the [ Enter] key.
The confirmation message appears.
Printing resumes if you press the [Escape] key after the message appears.
4. Press the [ Enter] key.
The job is canceled. When the cancellation procedure is complete, a message appears.
• If the printer is shared by multiple computers, be careful not to accidentally cancel someone else's
print job.
• Under Windows, If the printer is connected to the computer using a parallel cable, sent print jobs may
be canceled if the [Job Reset] key is pressed while "Waiting for print data..." is displayed on the control
panel. After the interval set in [I/O Timeout] in [Host Interface] has passed, the next print job can be
sent. A print job sent from a different client computer will not be canceled in this case.
• You cannot stop printing data that has already been processed. For this reason, printing may continue
for a few pages after you press the [Job Reset] key.
• A print job containing a large volume of data may take considerable time to stop.
If Error Occurs with the Specified Paper Size and Type
95
To Next Page
Loading...
Need help?
General
