UNIX Configuration
36
1
Staple
Select the staple position for the output.
Important
❒ When using this option, the optional finisher unit is required.
staple=value of staple position
The following sample shows how to print with the staple on the upper left using
finisher shift tray (host name : nphost, file name : file1, finisher shift tray):
•rsh
% rsh nphost print staple=lefttop,outbin=finishershift <
file1
•rcp
% rcp file1 nphost:staple=lefttop,outbin=finishershift
•ftp
ftp> put file1 staple=lefttop,outbin=finishershift
Note
❒ Available staple positions vary depending on type of installed output tray.
For details about staple, see the manual that comes with this machine.
❒ The value or actions that can be selected differ depending on the model you
are using. For details about available staple position, see the manual that
comes with this printer.
Position Value
Off off
Left top lefttop
Right top righttop
Left top horiz lefttophorizland, lefttophorizport
Left top slant lefttopslantland, lefttopslantlport
Left top vert lefttopvertland, lefttopvertport
Right top horiz righttophorizland, righttophorizport
Right top slant righttopslantland, righttopslantport
Right top vert righttopvertland, righttopvertport
Left 2 left2land, left2port
Right 2 right2land, right2port
Top 2 top2land, top2port
Booklet booklet
To Next Page
Loading...
Need help?
General
