• No security settings made.
• If security settings are made, an IP-specified client (this printer) permits updating.
DNS Servers Targeted for Operation
For static IP setting
• Microsoft DNS servers with standard Windows 2000 Server/Windows Server 2003/2003
R2/2008 features
• BIND 8.2.3 or higher
For DHCP setup, when the printer updates the A record
• Microsoft DNS servers with standard Windows 2000 Server/Windows Server 2003/2003
R2/2008 features
• Microsoft DNS servers with standard Windows 2000 Server/Windows Server 2003/2003
R2/2008 features
For DHCP setup, when the DHCP server updates records
• Microsoft DNS servers with standard Windows 2000 Server/Windows Server 2003/2003
R2/2008 features
• BIND 8.2.3 or higher
• DNS servers with standard NetWare 5 (or a higher version) features
For IPv6 setting
• Microsoft DNS servers with standard Windows Server 2003/2003 R2/2008 features
• BIND 9.2.3 or higher
DHCP Servers Targeted for Operation
As a substitute for the printer, DHCP servers capable of updating the A record and PTR record are as
follows:
• Microsoft DHCP servers with standard Windows 2000 Server (Service Pack 3 or higher versions)/
Windows Server 2003/2003 R2/2008 features
• ISC DHCP 3.0 or higher
• DHCP server with standard NetWare 5 features
Setting the Dynamic DNS Function
Make settings with telnet using the “dns” command.
9. Appendix
388
To Next Page
Loading...
Need help?
General
