PCL printer drivers
Two kinds of PCL printer driver (PCL 5e and PCL 6) are included. These drivers allow your computer
to communicate with this machine via a printer language. To use these drivers, the Printer Enhance
Option is required.
RPCS printer driver
This printer driver allows the computer to communicate with the printer using a printer language. In
addition to the conventional user interface, another preset user interface is provided. In addition to
the conventional user interface, another preset user interface is provided.
PostScript Printer Drivers and PPD files
PostScript printer drivers allow the computer to communicate with the printer using a printer language.
PPD files allow the printer driver to enable specific printer functions.
PPD files
PPD files allow the printer driver to enable specific printer functions.
• Some applications may require installation of the PCL 5e printer driver. In this case, you can install
PCL 5e without having to install PCL 6.
• For details, see "Installing the Printer Driver".
• p.20 "Installing the Printer Driver"
SmartDeviceMonitor for Admin
This section describes the file path and available functions of SmartDeviceMonitor for Admin.
SmartDeviceMonitor for Admin is an application that uses TCP/IP and IPX/SPX to monitor network printers.
It can monitor multiple network printers using IP address. We recommend that administrators use this
application.
File path
SmartDeviceMonitor for Admin is stored in the following folder in the CD-ROM:
\NETWORK\DEVMON\ADMIN\DISK1
Operating system Protocol stack
Windows 2000 TCP/IP provided with Windows 2000
IPX/SPX provided with Windows 2000
NetWare Client provided with Windows 2000
Novell Client provided with Windows 2000
Software and Utilities Included on the CD-ROM
375
To Next Page
Loading...
Need help?
General
