UNIX Configuration
14
1
Printing Method
Printing with lpr, lp
Execute one of the following commands according to type of workstation used:
❖ BSD UNIX workstation, Linux
% lpr -Pprinter_name file_name [file_name...]
For example:
The printer name is np, file names are file1 and file2
% lpr -Pnp file1 file2
❖ Solaris, HP-UX
% lp -d printer_name file_name [file_name...]
For example:
The printer name is np, file names are file1 and file2
% lp -d np file1 file2
Note
❒ “printer_name” is the name entered when executing the installation shell
script.
❒ You can use wild cards ( * or ? ) for the file name.
❒ The message “print session full” appears when the maximum number of
print requests has been reached (max. 5 sessions —Job Spool setting availa-
ble). You should try to print again when the number of requests is less than
five. You can check the number of print requests using telnet. For details
about using telnet, see the manual that comes with this machine.
❒ The number of print sessions does not change, whether you increase or re-
duce the machine's total memory size.
To Next Page
Loading...
Need help?
General
