UNIX Configuration
18
1
Parameters that can be used with rsh, rcp and ftp :
Note
❒ Leave the user name and password blank, and then press the {RETURN} ( {EN-
TER} ) key.
❒ “-” indicates standard output. Display will be displayed on screen if standard
output has not been specified.
Copying Information to a File
Use the rcp or ftp command to copy information about specified parameters to
a file.
You can use these commands for BSD and System V UNIX.
Important
❒ The same parameters are used as those above.
•rcp
% rcp host_name:parameter file_name
•ftp
% ftp host_name
User: user_name
password:
ftp> get parameter file_name
Note
❒ Leave the user name and password blank, and then press the {RETURN} ( {EN-
TER} ) key.
Parameter Information returned
stat
Status of the printer.
Information about print jobs.
info Information about the paper tray, output tray and printer language.
prnlog Record of the last 10 jobs printed.
syslog Record of messages about the network interface board.
To Next Page
Loading...
Need help?
General
