Using Adobe PageMaker Version 6.0, 6.5, or
7.0
Under Windows 2000/XP with Adobe PageMaker, you need to copy PPD files to the PageMaker folder.
PPD files have the .ppd extension in the folder "DRIVERS PS XP_VISTA (Language) DISK1" on the CD-
ROM.
The "XP_VISTA" folder inside the "PS" folder is for Windows 2000/XP, Windows Server 2003/2003 R2.
Use the folder that is appropriate for the operating system you are currently using.
The third folder "(Language)" may be substituted by an appropriate language name.
Copy the .ppd file to the PageMaker folder.
• For PageMaker 6.0 default installation
The directory is "C: PM6 RSRC PPD4".
• For PageMaker 6.5 default installation
The directory is "C: PM65 RSRC USENGLISH PPD4".
The "USENGLISH" may vary depending on your language selection.
• For PageMaker 7.0 default installation
The directory is "C: PM7 RSRC USENGLISH PPD4".
The "USENGLISH" may vary depending on your language selection.
• If the driver is not set correctly after copying the ".ppd" file, printing may not be performed properly.
• When using PageMaker, the optional features that can be selected by the printer driver will not be
active. The following procedure describes how to activate the optional printer features.
1. On the [File] menu, click [Print].
The [Print Document] dialog box appears.
2. Make the necessary settings in the [Features] box.
Using Adobe PageMaker Version 6.0, 6.5, or 7.0
55
To Next Page
Loading...
Need help?
General
