Cleaning the Paper Feed Roller
If the paper feed roller is dirty, a misfeed might occur. In this case, clean the roller as follows:
• When lifting the printer, use the grips on both sides of the printer, otherwise the printer might
fall and cause personal injury.
• When you move the printer, unplug the power cord from the wall outlet to avoid a fire or an
electric shock.
• When you pull out the plug from the socket, grip the plug to avoid damaging the cord and
causing a fire or an electric shock.
• If the printer is equipped with the optional paper feed unit, do not move the printer and unit together
as they are not securely attached.
• When lifting the printer, confirm that the optional paper feed unit is not attached to the printer.
• Do not use chemical cleaner or organic solvent such as thinner or benzine.
• Do not slide the paper tray in with force. If you do, the front and side guides might move.
1. Turn off the power.
2. Pull out the plug from the socket. Remove all the cables from the printer.
3. Pull out the paper tray until it stops.
To Next Page
Loading...
Need help?
General
