System description
SIMOCODE pro
1-108 GWA 4NEB 631 6050-22 DS 03
Connecting cable
In various designs and lengths. These are required to connect the basic unit
to its current measuring module and, if applicable, to its expansion modules
or the operator panel.
Notice:
The total length of all cables connecting modules and basic units must not
exceed 3 m per system interface of the basic unit!
Door adapter
Facilitates access to the SIMOCODE pro system interface, for example via
the front panel, to ensure fast parameterization.
System interface cover
To protect and/or seal the system interfaces against soiling. In normal
operation, unused system interfaces must be closed.
Operator panel adapter
Enables the use of the SIMOCODE pro 3UF720 operator panel in a front
panel cut-out, in which a SIMOCODE DP 3UF52 operator panel (IP54 degree
of protection) was previously used, e.g. after a system change. Can also be
used when replacing a 3UF721 operator panel with display with a 3UF720
standard operator panel.
To Next Page
Loading...
Need help?
General
