Mounting, wiring, interfaces
SIMOCODE pro
GWA 4NEB 631 6050-22 DS 03
13-31
13.3.4 Current/voltage measuring modules
Select a suitable current/voltage measuring module for measuring current
and voltage, depending on the motor current size:
• Through-hole technology up to 200 A: The cables of the three phases are
passed through the through-hole openings.
• Bus connection system from 20 A to 630 A, also for direct connection to
Siemens contactors.
The following table shows the various current/voltage measuring modules:
Current/voltage measuring
modules
Main circuit
connection
3UF7110-1AA00-0
0.3 A - 3 A
Ø through-hole
openings: 7.5 mm
Through-hole
technology
3UF7111-1AA00-0
2.4 A - 25 A
Ø through-hole
openings: 7.5 mm
3UF7112-1AA00-0
10 A - 100 A
Ø through-hole
openings: 14 mm
3UF7113-1AA00-0
20 A - 200 A
Ø through-hole
openings: 25 mm
3UF7113-1BA00-0
20 A up to 200 A
Conductor cross
section:
16 mm² - 95 mm²,
AWG 6 to 3/0
Bus connection
system
3UF7114-1BA00-0
63 A - 630 A
Conductor cross
section:
50 mm² - 240 mm²,
AWG 1/0 kcmil to
500 kcmil
Table 13-14: Current/voltage measuring modules
L1
L2
L3
N
M
~
3
L1 L2 L3
T1 T2 T3
L1 L2 L3
To Next Page
Loading...
Need help?
General
