Mounting, wiring, interfaces
SIMOCODE pro
GWA 4NEB 631 6050-22 DS 03
13-47
13.6 Installation guidelines for the PROFIBUS DP
Specifications
The key data contained in this chapter is valid for Siemens products and
cables.
PROFIBUS User Organization (PUO) installation guidelines
For electrical PROFIBUS networks, please also adhere to the
PROFIBUS DP/FMS installation guidelines of the PROFIBUS User
Organization. They contain important information about the cable routing
and commissioning of
PROFIBUS networks.
Publisher:
PROFIBUS User Organization
Haid-und-Neu-Strasse 7
76131 Karlsruhe, Germany
Tel.: +49 721 96 58 590
Fax: +49 721 96 58 589
Internet: http://www.profibus.com
Guidelines, Order No. 2.111
See also the "SIMATIC NET PROFIBUS Networks" manual at
http://support.automation.siemens.com/WW/view/en/1971286.
Application of bus termination modules
The 3UF1900-1K.00 bus termination module is primarily intended for use in
MCC motor feeders. It provides correct bus termination, even for removed
MCC plug-in units. The bus termination module can also be utilized when a
standard SUB-D plug cannot be used for the last device on a bus line.
The 3UF1900-1KA00 bus termination module may also be connected to 220/
230 V, 380/400 V, 115/120 V or 24 V AC. The 3UF1900-1KB00 version can be
used for 24 V DC.
Fig. 13-34: Bus termination module
To Next Page
Loading...
Need help?
General
