System description
SIMOCODE pro
GWA 4NEB 631 6050-22 DS 03
1-99
1.7.7 Expansion modules for the SIMOCODE pro V device series
Expansion modules are intended as optional additions for the
SIMOCODE pro V device series. The following expansion modules are
available:
• Digital modules (DM)
• Failsafe digital module Failsafe Local (DM-F Local)
• Failsafe digital module Failsafe PROFIsafe (DM-F PROFIsafe)
• Analog module (AM)
• Earth-fault module (EM)
• Temperature module (TM).
All expansion modules have the same design with an enclosure width of
22.5 mm. They are equipped with 2 system interfaces (incoming/outgoing)
and removable terminals. The expansion module is connected via a
connecting cable to the first system interface of basic unit 2. Further
expansion modules or the operator panel can be connected via the second
system interface. The expansion modules draw power from basic unit 2 via
the connecting cables.
All expansion modules are suitable for standard rail mounting or can be fixed
to the mounting plate using additional push-in lugs.
Fig. 1-39: Expansion modules, SIMOCODE pro V device series
Notice:
Expansion modules can only be used in conjunction with basic unit 2!
Up to 5 expansion modules can be connected to a basic unit in any order.
When using an operator panel with display and/or a decoupling module,
ensure that additional limitations governing the number of expansion
modules that can be connected per basic unit are observed!
See Chapter 1.7.8 "Configuration information for using an operator panel
with display and/or a decoupling module".
To Next Page
Loading...
Need help?
General
