Siemens SIMOCODE pro System Manual

Data formats and data records
SIMOCODE pro
B-46 GWA 4NEB 631 6050-22 DS 03
B.21.2 Direct starter
Table B-23: Assignment of cyclic receive/send data, direct starter
*) for SIMOCODE pro V, basic type 1 only
Cyclic receive data
Bit 0.0 Not connected
Bit 0.1 Device parameters -> Motor control -> Control stations -> PLC/PCS [DP] -> OFF
Bit 0.2 Device parameters -> Motor control -> Control stations -> PLC/PCS [DP] -> ON
Bit 0.3 Further function blocks -> Standard functions - Test/Reset -> Test 1 - Input
Bit 0.4 Further function blocks -> Standard functions -> Emergency start -> Emergency start - Input
Bit 0.5 Device parameters -> Motor control -> Control stations -> Mode selector S1
Bit 0.6 Further function blocks -> Standard functions -> Test/Reset -> Reset 1 - Input
Bit 0.7 Not connected
Bit 1.0 Not connected
Bit 1.1 Not connected
Bit 1.2 Not connected
Bit 1.3 Not connected
Bit 1.4 Not connected
Bit 1.5 Not connected
Bit 1.6 Not connected
Bit 1.7 Not connected
Byte 2/3 *) (analog value) Not connected
Cyclic send data
Bit 0.0 Not connected
Bit 0.1 Status - OFF
Bit 0.2 Status - ON >
Bit 0.3 Event - Pre-warning overload (I>115 %)
Bit 0.4 Not connected
Bit 0.5 Status - Remote mode
Bit 0.6 Status - General fault
Bit 0.7 Status - General warning
Bit 1.0 Not connected
Bit 1.1 Not connected
Bit 1.2 Not connected
Bit 1.3 Not connected
Bit 1.4 Not connected
Bit 1.5 Not connected
Bit 1.6 Not connected
Bit 1.7 Not connected
Byte 2/3 (analog value) Maximum current I_max
Byte 4/5 *) (analog value) Not connected
Byte 6/7 *) (analog value) Not connected
Byte 8/9 *) (analog value) Not connected

Siemens SIMOCODE pro Specifications

General

Brand	Siemens
Model	SIMOCODE pro
Category	Control Unit
Language	English