Monitoring functions
SIMOCODE pro
GWA 4NEB 631 6050- 22 DS 03
5-19
Response
Table 5-15: "Operation monitoring" response
5.7.2 Operating hours monitoring
The motor operating hours monitoring function enables the operating hours
(service life) of a motor to be recorded so that motor maintenance prompts
can be generated in good time as applicable.
Level
If the operating hours exceed the set response level, the monitoring
function responds.
Activity
Unless deactivated, this function is always active, independent of whether
the motor is running or not (operating state "ON").
Response
You can set the response for overshoot here.
See also "Tables of responses of SIMOCODE pro" in Chapter "Important
information" and Table 5-15.
5.7.3 Motor stop time monitoring
System parts for important processes often have dual drives (A and B
drives). Ensure that these are always operated alternately. This prevents
long motor stop times and reduces the risk of non-availability. The motor
stop time monitoring function can be used, for example, to generate an
alarm, thus initiating connection of the motor.
Level
The length of the permissible motor stop time is stipulated here; if
exceeded, the monitoring function responds.
Activity
Unless deactivated, this function is always active, independent of whether
the motor is running or not (operating state "ON").
Response Motor operating
hours
monitoring level
Motor stop time
monitoring level
Number of
starts -
overshoot
Number of
starts -
pre-warning
Deactivated X X X X
Signaling X X X X
Warning X X X X
Tripping - - X -
Level: 0
to 1193046 hours (0 h)
Level: 0
to 65535 hours (0 h)
To Next Page
Loading...
Need help?
General
