Communication
SIMOCODE pro
12-26 GWA 4NEB 631 6050-22 DS 03
12.8.2 SIMATIC PDM
The standard version of SIMATIC PDM (PDM Basic) provides you with a
comparable functionality to SIMOCODE ES for parameterization of
SIMOCODE pro via PROFIBUS:
The following additional functions are available with the PDM option
"Integration in STEP7":
• "Offline saving" of SIMOCODE pro parameter data in the STEP7 project and
manual transmission (no automatic transfer of parameter data during
startup!)
• "Routing via S7 stations".
Example: Parameterization of all SIMOCODE pro devices from a central
engineering station, together with hardware components which provide a
data record gateway (CP443-5 Extended, IE/PB link), also in connection with
different networks.
Notice
The startup parameter block (Device Parameter > Bus Parameter) must
always be set for this form of parameterization to avoid overwriting the
device parameters with any existing parameter data during startup.
You will find further information about SIMATIC PDM in the SIMATIC PDM
manual.
To Next Page
Loading...
Need help?
General
