System description
SIMOCODE pro
1-12 GWA 4NEB 631 6050-22 DS 03
Recording, displaying and evaluating measured values
The following measured values are required for monitoring the process:
• The pump motor current, which is measured by the current measuring
module.
• The analog value of the fill-level indicator, which is measured by the analog
module.
The measured values are evaluated directly by SIMOCODE pro and/or
transferred via PROFIBUS DP to the PLC/PCS.
Any measured value can be output via the analog module, e.g. the effective
motor current on a connected pointer instrument.
Optionally, a laptop with the SIMOCODE ES software, for example, can be
connected to the operator panel so that further process data can be locally
evaluated.
To Next Page
Loading...
Need help?
General
