Siemens SIMOCODE pro System Manual

Mounting, wiring, interfaces
SIMOCODE pro
13-40 GWA 4NEB 631 6050-22 DS 03
Sequence for connecting cables to the system interface
Proceed as follows:
Table 13-16: Connecting to the system interface
Fig. 13-28: Procedure for connecting to the system interfaces
Safety guidelines
Notice
For SIMOCODE pro C, the system interfaces on the bottom can only be
used for the current measuring module!
Step Description
1 Place the plug in the plug shaft, keeping it is as straight as possible. Ensure
that the catches on the plug shaft above the plug housing audibly click into
place.
For SIMOCODE pro C, the system interfaces on the bottom can only be
used for the current measuring module!
2 Use the cover to close system interfaces that are not in use
Connecting
cable
Cover
System interfaces on the
1
2
3
front side and bottom
Example: SIMOCODE pro C
Catches
Catches
Color coding

Siemens SIMOCODE pro Specifications

General

Brand	Siemens
Model	SIMOCODE pro
Category	Control Unit
Language	English