Siemens SIMOCODE pro System Manual

Tables
SIMOCODE pro
A-4 GWA 4NEB 631 6050-22 DS 03
Specifications
The following specifications apply in the tables:
Fig. A-1: Table specifications
Event - PRM error number (bytes):
If parameterization is not possible, the number of the parameter group
(PRM group) which caused the error is transmitted here.
Fig. A-2: Example for parameter group
Designation Type Range Unit Information
Reserved Byte[4]
Cos phi Byte 0 .. 100 1 % BU2
Reserved Byte[5]
Max. current I_max Word 0 .. 65535 1 % / I
s
BU1 BU2
Entry relevant for basic unit
and basic unit 2
Example
Entries in italics are
not relevant (reserved)
and, when writing,
should be filled with "0"
Parameters can be changed while running.
Byte.Bit Designation
(PRM group)
0.0 Reserved
4.0 Device configuration (12) Parameter group 12
. . .
. . .

Siemens SIMOCODE pro Specifications

General

Brand	Siemens
Model	SIMOCODE pro
Category	Control Unit
Language	English