TB8100 Service Manual Safety and Servicing Information 21
© Tait Electronics Limited September 2006
1.4.7 PCB Information
All PCBs are identified by a unique 10 digit IPN (internal part number)
which is printed onto the PCB (usually on the top side), as shown in the
example below.
The last two digits of this number define the issue status, which starts at 01
and increments through 02, 03, 04 etc. as the PCB is updated.
PCB information for a particular circuit board consists of the relevant
BOMs, PCB layouts, and circuit diagrams. Contact your nearest Customer
Service Organisation for more details on the availability of PCB information
(refer to “Contact Information” on page 2).
1.4.8 Tait FOCUS Database
An additional source of information to service centres is the Tait FOCUS
call-logging database. This is also accessible on the Technical Support
website. All customer-related technical issues regarding TB8100 equipment
are recorded on this database. These issues may be raised by both customers
and service centres. Technical Support resolves the issues and informs the
customer or service centre concerned of the outcome. All issues and their
solutions are available for review by all service centres.
To Next Page
Loading...
Need help?
General
