TIP. Click the Bus Setup button to quickly access the Bus Setup control window.
What do you want to do next?
Learn how to connect a logic probe to signals in your system under test.
Learn how to turn on or turn off the digital channels.
Learn how to set up the digital channels.
Learn about bus setups.
Learn about bus configuration.
Learn how to set up a bus.
Learn how to set up digital waveforms.
Learn how to view analog characteristics of a digital waveform.
Learn how to trigger on a bus.
Learn how to track down serial bus anomalies.
Learn how to troubleshoot circuits using a parallel bus.
Learn how to troubleshoot a serial bus.
Setting up digital signal inputs
Use the Digital setup menu to set up the digital channels to acquire signals.
NOTE. Digital Setup is available only on MSO5000B and MSO70000C/DX Series instruments and DPO5000B Series
instruments with option MSOE installed, and DPO70000DX instruments with option MSOU installed.
Digital setups
100 DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series
To Next Page
Loading...
Need help?
General
