Tektronix DPO7054C Printable Help

To use.
■
Click in the Scale entry box and use the multipurpose knob or keypad to change the setting.
Behavior. The Scale control scales all live displayed waveforms at the same time.
The scale units depend on the waveform type. In most cases the horizontal units will be time. However, the horizontal units can
also be frequency.
TIP. Use the dedicated front-panel Horizontal Scale knob to change the horizontal scale.
What do you want to do next?
Learn about the Horizontal Setup control window.
Learn about the Acquisition Setup control window.
Horizontal reference marker
Horizontal delay mode
Use the Horizontal Delay Mode button to delay the acquisition relative to the trigger event.
■
When Horizontal Delay Mode is On, use the Acquisition Delay control to enter the delay time.
■
You can also enter the delay time with the front-panel Horizontal Position knob.
TIP. The Horizontal Delay Mode button functions identically to the Delay Mode button in the Horizontal/Acquisition control
window.
Set the horizontal delay
From the Horiz /Acq menu, select Position/Scale to open the Horizontal Position/Scale control window.
Overview. The Horiz Delay control delays the acquisition relative to the trigger event.
To use.
■
Click Delay Mode On or push the front-panel Delay button to activate horizontal delay.
■
Click in the Horiz Delay entry box and use the multipurpose knob or keypad to change the setting. You can also use the
dedicated Horizontal Position knob on the front panel.
Oscilloscope reference
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series 769

Tektronix DPO7054C Specifications

General

Brand	Tektronix
Model	DPO7054C
Category	Test Equipment
Language	English