To Next Page

To Previous Page

Set to 50

Push the front-panel Level knob (DPO7AFP required on DPO70000SX instruments). This control is also available in some trigger

setup windows.

To use

Click this button to have the instrument automatically search for and set the trigger level to a value halfway between the peaks of

the trigger source signal.

NOTE. Some trigger types support multiple trigger levels, whereas other trigger types are unsupported, and the front-panel

control is inoperative. This control also works differently for certain Comm triggers.

A event triggers

Set up a parallel bus trigger

From the Trigger menu, select the Bus setup.

Overview. Use the controls to define the trigger for a Parallel bus.

To use. For information on the controls, click the buttons.

■

Trigger Type

■

Mark All Trigger Events

■

Pattern Condition

■

Time

■

Pattern

■

Edit Button (MSO70000C/DX Series)

■

Edit Button (MSO/DPO5000B Series)

■

Pattern Format

■

Logic Thresholds

Trigger setups

DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series 383

Tektronix DPO7054C Printable Help

Other manuals for Tektronix DPO7054C