Tektronix DPO7054C Printable Help

Select the data source channel
Use the Source drop-down list to select the input channel that is connected to the data signal.
Set the data threshold level
To set the data threshold voltage level:
1. Click in the Data Level entry box.
2. Use the multipurpose knob to set the data voltage level.
Set the setup and hold times
Use the Setup Time and the Hold Time controls to specify the setup and hold limits.
1. Click in a data entry box.
2. Use the multipurpose knobs to set the limits.
Enter a spectral math equation
From the Math menu, select Equation Editor, or click the Editor button in the Math Setup or Spectral Setup control windows.
To use.
■
Select a Math <1-4> waveform from the drop-down list.
■
Click in the readout field to enter the math expression.
■
Click a button to enter its character or operator into the expression.
■
Click the Editor button and use the Math Equation Editor controls to insert numerals, math operators, and variables into a
math expression.
■
Use the Text Edit Controls to move the insertion point (cursor) within the expression.
Behavior. These controls only affect the selected math waveform.
What do you want to do next?
Learn about the Equation Editor.
Enter a spectral math expression
From the Math menu, select Advanced Spectral, or click Advanced in the Math Setup control window; then open the Create/Edit
tab.
Oscilloscope reference
828 DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series

Tektronix DPO7054C Specifications

General

Brand	Tektronix
Model	DPO7054C
Category	Test Equipment
Language	English