To Next Page

To Previous Page

Control Changed by Autoset to

Vertical Bandwidth Full

Vertical Offset 0 volts

Zoom Off

Set autoset preferences

From the Utilities menu, select User Preferences and the Prompts tab.

Overview

You can set the instrument to display a prompt asking you to confirm the requested action before applying the Autoset function.

To use

Select User Preferences from the Utilities menu to display the Prompt Before Action window.

■

Click Autoset to toggle between Off and On. Off immediately performs an Autoset when the Autoset button is pushed. On

displays a prompt when the Autoset button is pushed.

■

Click Close to save your selection.

Undo an autoset

Press Autoset on the instrument front panel to undo the last autoset operation.

Overview

The Autoset Undo window opens automatically following an autoset. Use this control to undo the last autoset operation.

Horizontal and acquisition setups

DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series 189

Tektronix DPO7054C Printable Help

Other manuals for Tektronix DPO7054C