Tektronix DPO7054C Printable Help

Search type Description Equivalent trigger
Timeout Searches for no pulse in a specified time. Timeout Trigger Control Window
Transition Search for rising and or falling edges that
are >, <, =, or ≠ a user-specified time.
Transition Time Trigger Control Window
Window Searches for a signal that is entering or
leaving the threshold window. Qualify the
search in terms of time by using the
When Wider option, or by the logical state
of other channels using the When Logic
option.
Window Trigger Control Window
DDR Searches Searches for DDR read or write events on
source waveforms.
None
Bus Search for bus events on source
waveforms.
Bus Trigger Control Window for Parallel
Bus Trigger Control Window for I2C Serial
Bus Trigger Control Window for SPI
Serial
Bus Trigger Control Window for RS232
Serial
Bus Trigger Control Window for USB
Serial
Search MIPI Bus
Bus Trigger Control Window for PCIe
Serial
Bus Trigger Control Window for CAN
Serial
Bus Trigger Control Window for LIN Serial
Bus Trigger Control Window for
FLEXRAY Serial
Check search results
From the Analyze menu, select Search; then open the Results tab.
Overview
The table in this window displays timing information for all marks placed during a search.
To use
For information on the controls, click the buttons.
■
User Marks in Table
■
Digits
■
Export
■
View
Analyzing waveforms
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series 305

Tektronix DPO7054C Specifications

General

Brand	Tektronix
Model	DPO7054C
Category	Test Equipment
Language	English