To Next Page

To Previous Page

The On-Screen MultiView zoom menu

Peak to peak

This voltage measurement is the absolute difference between the maximum and minimum amplitude in the entire waveform or

gated region.

Period

This measurement is the time required to complete the first cycle in a waveform or gated region. Period is the reciprocal of

frequency and is measured in seconds.

Select trigger polarity

Select the polarity from the drop-down list.

■

Click Positive to trigger on a positive-going pulse.

■

Click Negative to trigger on a negative-going pulse.

■

Click Either to trigger the instrument on either polarity.

Positive duty cycle

This timing measurement is the ratio of the positive pulse width to the signal period expressed as a percentage.

The duty cycle is measured on the first cycle in the waveform or gated region.

Positive Duty Cycle = ((Positive Width) ÷ Period) × 100%

Oscilloscope reference

814 DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series

Tektronix DPO7054C Printable Help

Other manuals for Tektronix DPO7054C