To Next Page

To Previous Page

To use

■

Click the Global Threshold entry box and enter a value for the voltage threshold level with the keypad.

■

Click the Apply button.

Behavior

The instrument sets the thresholds for all digital channels to the same voltage level.

What do you want to do next?

Learn how to set the threshold for Ch1-Ch4 (live) and Math1-Math4 channels to use as logic waveforms.

Learn more about digital setups.

Learn about bus setups.

Learn about bus configuration.

Set up digital channels

NOTE. The Digital Channels D15-D8 and D7-D0 Tabs option is available only on MSO5000B and MSO70000C/DX Series

instruments and DPO5000B Series instruments with option MSOE installed, and DPO70000DX instruments with option MSOU

installed.

From the Digital Setup menu, select the D15-D8 or the D7-D0 tab to set up digital channels.

To use

■

Click a digital channel to turn on or turn off the display of the channel.

■

Click the Threshold entry box and use the keypad to enter a value for the voltage level or use the multipurpose knobs to

select a voltage level.

■

Click the Position entry box and move the channel using the multipurpose knob.

■

Select the size of the waveform in the display.

Digital setups

DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series 105

Tektronix DPO7054C Printable Help

Other manuals for Tektronix DPO7054C