Tektronix DPO7054C Printable Help

Select the serial data format
From the Trig menu, Select Serial Pattern Setup.
To use.
■
In the Format drop-down list, select the data format, Binary or Hex, depending on how you want to view the data.
Select the serial data source
From the Trig menu, select Serial Pattern Setup.
To use.
■
In the Data Src drop-down list, select the data source for the trigger.
Behavior. Depending on which clock source you use, the Clk Polarity and Clk Level controls appear. Use these controls to set
the clock polarity and clock level threshold.
Select the serial data standard
From the Trig menu, select Serial Pattern Setup.
To use.
■
In the Standard drop-down list, select the data standard for the trigger.
Serial mask testing option
■
Install Option MTM on DPO7000C and MSO/DPO5000B Series instruments.
■
Install Option MTH on DPO70000C/DX and MSO70000C/DX Series instruments.
Define the serial pattern data
From the Trig menu, select RS-232, Serial, or SPI Setup and then click the Edit button.
Oscilloscope reference
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series 825

Tektronix DPO7054C Specifications

General

Brand	Tektronix
Model	DPO7054C
Category	Test Equipment
Language	English