To Next Page

To Previous Page

■

Serial Threshold

■

Polarity

■

Data Bits

■

Parity

■

Bit Rate

To use

■

To change the input for a component, click the Input and select a channel from the cascading lists.

■

To change the voltage threshold level, click the Threshold entry box and use the keypad to enter a value or use the

multipurpose knobs to select a voltage level.

■

To set the polarity, click the Polarity entry box and select from the drop-down list.

■

To set the data bits, click the Data Bits entry box and select from the drop-down list.

■

To set the parity, click the Parity entry box and select from the drop-down list.

■

To set the bit rate, click the Bit Rate entry box and select from the drop-down list.

Behavior

The instrument changes the components, voltage threshold levels, polarity, data bits, parity, and bit rate, and uses those to

decode the selected RS-232 bus.

What do you want to do next?

Learn more about bus setups.

Learn about bus configuration.

Learn about digital setups.

Learn how to set up an I2C serial bus.

Learn how to set up an SPI serial bus.

Learn how to set up a USB serial bus.

Learn how to set up an RS-232 serial bus.

Learn how to set up a MIPI DSI1 Serial Bus

Learn how to set up a MIPI CSI2 Serial Bus

Learn how to set up an 8B10B Serial Bus

Bus setups

DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series 117

Tektronix DPO7054C Printable Help

Other manuals for Tektronix DPO7054C