Tektronix TG8000 User Manual

ATG7 Analog Test Generator module
STATUS. Displa
ys the current video standard and the s elected signal for the
SIGNAL output.
SELECT OUTPUT. Selects the output whose parameters will be set. Use the left
(◄)orright(►) arrow button to make the selection. The choices are BLACK 1 ,
BLACK 2,orBARS. Select any of the items, and then press the ENTER button
to access th
e SELECT OUTPUT submenu. (See page 3-122.)
ID TEXT. Sets a text that is overlaid on the test signal output from the SIGNAL
connector. Select this menu item, and then press the ENTER button to access the
ID TEXT submenu. (See page 3-25.)
TIMING. S
ets the timing offset of the SIGNAL output relative to the internal
reference signal (frame reset signal). Select this menu item, and then press the
ENTER button to access the TIMING submenu. (See page 3-26.)
APL. Sets the APL and Bounce features available for the test s ignal output from
the SIGNAL connector. Select this menu item, and then p ress the ENTER button
to acc
ess the APL submenu. (See page 3-27.)
3–22 TG8000 Multiformat Test Signal Generator User Manual

Tektronix TG8000 Specifications

General

Brand	Tektronix
Model	TG8000
Category	Portable Generator
Language	English