120 Printing Basics
Printing With Google Cloud Print
This section provides information for Google Cloud Print™ service with your smart phone, tablet, or any other
device. By registering the printer to your Google™ account, you can use the Google Cloud Print service to print from
various devices connected to the Internet. You can print documents, photos or e-mails using the Google Chrome™
browser or applications such as Google Drive™ on your mobile device. For more information about Google Cloud
Print, visit the Google web site.
Preparing to Use the Printer with Google Cloud Print
To use Google Cloud Print, you need to prepare the following in advance:
• Connect the printer to a network that has access to the Internet.
NOTE:
• Google Cloud Print supports only IPv4 connection.
• If the printer is connected to a network that uses a proxy server, you need to specify the settings in Proxy Server from the
CentreWare Internet Services. For more information, see "CentreWare Internet Services" on page 38.
• Acquire a Google account and a Gmail™ address.
• Set Google Cloud Print to Enable from the operator panel menu, or set GCP to Enabled from the
CentreWare Internet Services.
• When using the operator panel
1 Press the (System) button.
2 Select the Tools tab, and then select Admin Settings.
3 Select Network.
4 Select Protocols.
5 Select until Google Cloud Print appears, and then select Google Cloud Print.
6 Select Enable.
7 Turn off the printer, and turn it on again to apply the settings.
• When using the CentreWare Internet Services
1 Launch the CentreWare Internet Services by entering IP address of the printer in your web browser.
For more information, see "CentreWare Internet Services" on page 38.
2 Click the Properties tab.
3 In the left navigation panel, click Port Status.
4 Select the Enabled check box for GCP.
5 Click Apply.
6 Click Reboot Machine to restart the printer.
The printer is ready for Google Cloud Print.
To Next Page
Loading...
Need help?
General
